Toshiba R410A service manual Parts Name Of Remote Controller, Display section

PARTS NAME OF REMOTE CONTROLLER

Display section

All display items are shown in right figure for the explanation.

Only selected contents are displayed in actual operation.

•When turning on the leakage breaker at the first time, [SET DATA] flashes on the display part of the remote controller. While this display is flashing, the model is being automatically confirmed. Accordingly, wait for a while after [SET DATA] display has disap- peared, and then use the remote controller.

SET DATA

SETTING

SET

CODE No.

UNIT No.

TEST R.C. No.

UNIT

CL

Display section

Operation section

		1 9
2					CODE No.	10
	3
4		SET DATA			11
				UNIT No.
	5	SETTING	TEST	R.C. No.		12
6
	7				13	14
8					15	16

1 SET DATA display

Displayed during setup a timer.

2 Operation mode display

The selected operation mode is displayed.

3 CHECK display

Displayed while the protective device works or a trouble occurs.

4 Timer time display

Set time by the timer is displayed.

(When a trouble occurs, the check code is displayed.)

10 SWING display

Displayed during up/down movement of the flap.

11 Set up temperature display

The selected set up temp. is displayed.

12 Remote controller sensor display

Displayed while the sensor of the remote controller is working.

13 PRE-HEAT display

Displayed when the heating operation starts or defrost operation is carried out.

5

6

7

8

9

Timer SETIN setup display

When pushing the Timer SET button, the display of the timer is selected in order of

[OFF] → [OFF] repeat OFF timer

→[ON]

→ No display.

Filter display

If “FILTER ” is displayed, clean the air filter.

UP/DOWN grille display

Ventilator operation display

Flap position display

While this indication is displayed, the indoor fan stops or the mode changes in LOW.

14 No function display

Displayed if there is no function even if the button is pushed.

15 Fan mode display

The selected fan mode is displayed. (AUTO)

(HIGH) (MED.) (LOW)

16 TEST run display

Displayed during a test run.

34