Toshiba RD-XV48KE Skip the Periodical Timer Recording, Stop the Timer Recording in Progress

E3LG0ED_EN.book Page 35 Wednesday, April 30, 2008 11:52 AM

Skip the Periodical Timer Recording

You can deactivate the periodical (Daily, Mon-Frior Weekly) timer recording temporarily.

1 In stop mode, press [TIMER PROG.].

2 Select the periodical timer recording programme you want to skip using [U \ D], then press [ENTER].

3 Select “Programme Change” using [U \ D], then press [ENTER].

4 Move the cursor to the “Skip” field using [L \ P], then select “ON” using [U \ D] and then press [ENTER] to activate the setting.

•“✔” will be displayed on the left side of the timer programme.

•The setting will go back to “OFF” after the programme is skipped once.

Stop the Timer Recording in Progress

On the front panel of the unit, press [C STOP] to stop the recording, or press and hold [STOP C] on the remote control for 2 seconds.

•You can also stop the timer recording in progress by deleting the timer programme. Press

[TIMER PROG.] while the timer recording is in progress, then follow steps 2-A)and 3 of the “Checking, Cancelling or Correcting the Timer Programming Information” on page 34.

If the Timer Programming Did Not Complete Correctly

The error number appears on “Timer Programming” list.

Timer Programming

0:00 THU 06/12

	Date	Start	End	CH	VPS
					PDC
E40	06/12	7:00	9:00	P01

New Programme

1/1

The error programme will be displayed in grey with an error number.

The error numbers indicate:

E1–E22,

E37–E39 : Recording error

E23–E24 : Unrecordable disc

E25/E51 : • Copy prohibited programme

:• Cannot record because of the NTSC

/PAL-60signal is received. E26–E28 : Copy prohibited programme

E29 : Disc protected

E30	: Disc full
E31	: Already recorded 99 titles (Video
	mode)
E32	: Already recorded 99 titles (VR mode)
E33	: Already recorded 999 chapters
E34	: No space for Control Information
E35	: PCA (Power Calibration Area) full
E36	: Already finalised Video format disc
E40	: • There are some unrecorded parts
	due the overlapped timer
	programmes.
	: • Recording did not start at the start
	time.
E41	: Power failure
E42	: No disc
E43	: Already 49 titles recorded
	(+VR mode)
E44	: Already 254 chapters recorded
	(+VR mode)
E45	: Copy prohibited programme
E46	: It is impossible to record additionally
	on a disc recorded by other units
	when setting “Make Recording
	Compatible” to “OFF”. (+VR mode)
E47	: Already 600 titles recorded on the
	HDD.
E49–E50	: HDD recording is cancelled due to the
	insufficiency of the disc space on the
	HDD.

•Timer programme with an error number will be cleared once the entry screen for the programme is displayed.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

EN 35