Toshiba RD-XV48KE owner manual Settings for External Equipment, Video Colour System, 38 EN

Note

• During recording, if a signal other than PAL is detected (such as NTSC), recording is paused.

• If the external equipment is connected to AV2, the picture of the external equipment will be output except during the DVD playback of this unit. Turn off the external equipment or press [DISPLAY] to output the picture of this unit.

• If you wish to make a recording from the DV input (AV4) on the front panel, see instructions for this starting on the following page.

Press [C STOP] (HDD/DVD) or

[A / C EJECT/STOP] (VCR) on the unit to stop recording.

Select a recording mode using [REC MODE]. (See page 26.)

3

4 Press [I REC] on the unit to start recording.

5 Press the [PLAY] button on the external equipment.

6

2 Select the input terminal to which the external equipment is connected (AV1, AV2, or AV3).

To use the input jacks on the rear of the unit, select “AV1” or “AV2” position by pressing [INPUT SELECT F] or [PROG. G \ H]. To use the input jacks on the front of this unit, select “AV3” position by pressing

[INPUT SELECT F] or [PROG. G \ H].

Select “Recording” using [U \ D], then press [ENTER].

Select “Video Colour System” using [U \ D], then press [ENTER].

Before recording from external equipment, see pages 20 to 21 for connection instructions.

1 Turn the TV and the unit on, and select the input of the TV to which the unit is connected.

If you are recording to the HDD, press [HDD]. If you are recording to a disc, press [DVD] and insert a recordable disc.

If you are recording to a videotape, press [VCR] and insert a recordable videotape.

E3LG0ED_EN.book Page 38 Wednesday, April 30, 2008 11:52 AM

Settings for External Equipment

Video Colour System

When you record from external equipment or copy a videotape to a HDD/DVD disc, you can set the format Auto, PAL or SECAM.

1 In stop mode, press [SETUP]. Select “General Setting” using [U \ D], then press [ENTER].

2

3

4 Select “Auto”, “PAL” or “SECAM” using [U \ D], then press [ENTER].

General Setting
Playback		Auto Chapter
Display
Video		Recording Audio Select (XP)
Recording		Auto Finalise
	Video Colour System
Clock	 Auto	Aspect Ratio (Video mode)
Channel		Compatible
DivX	PAL	Bilingual Recording Audio
	SECAM
HDMI		External Input Audio
Reset All		Video Colour System

Auto	: The video colour system will be set
	automatically according to the
	recording material.
PAL	: The video colour system will be set to
	PAL.

SECAM: The video colour system will be set to

SECAM.

5 Press [SETUP] to exit.

Note

•During recording, when a signal other than PAL or SECAM is detected, an error message appears on the screen and recording will be paused. Recording will be resumed when a PAL or SECAM signal is detected.

Recording from External Equipment

Video VR

HDD DVD-RW DVD-RW DVD-R

DVD+RW DVD+R VCR

38 EN