Toshiba RD-XV48KE owner manual Basic Recording, 32 EN, Press B ON\STANDBY to turn on the unit

E3LG0ED_EN.book Page 32 Wednesday, April 30, 2008 11:52 AM

Basic Recording

Video VR

HDD DVD-RW DVD-RW DVD-R

DVD+RW DVD+R

Follow the steps below to record a TV programme. (See page 81 for VCR recording.)

1 Press [B ON\STANDBY] to turn on the unit.

Turn on the TV and be sure to select the input to which the unit is connected.

If you are recording to the HDD, press [HDD], then proceed to step 5.

If you are recording to a disc, press [DVD].

2 Press [OPEN\CLOSE A] to open the disc tray.

3 Place the disc on the disc tray with its label facing up. Be sure to align the disc with the disc tray guide.

Disc tray guide

4 Press [OPEN\CLOSE A] to close the disc tray.

5 Select the recording mode using [REC MODE]. (See page 26.)

6 Select the desired channel to record using [PROG. G \ H] or

[the Number buttons].

7 Press [REC I] to start recording.

The “I HDD” or “I DVD” mark will be displayed on the TV screen briefly.

To pause the recording, press [PAUSE F]. Press [PAUSE F] or [REC I] again to restart the recording.

8 Press [STOP C] to stop the recording.

This operation may take a few moments to complete.

Hint

•You can change the channel while in the REC pause mode.

Note

•Recording continues until the disc is full (as for HDD, 12 hours after the recording starts) or you stop the recording.

•You cannot change the recording mode in the REC or REC pause mode.

•Even if the broadcast you are recording is in the SECAM system, this unit automatically converts it to the PAL system when recording.

•If the external equipment is connected to AV2, the picture of the external equipment will be output except during the DVD playback of this unit. Turn off the external equipment or press [DISPLAY] to output the picture from this unit.

•You can play back a title on one component while making a recording on the other component. To do so, simply select the component (HDD or DVD) you want to use for the playback by pressing [HDD] or [DVD] during HDD / DVD recording. And then follow the normal playback procedure.

•If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD] or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.

•NTSC recording is prohibited in this unit.

32 EN