75
EN
Set to “ON” to make the dynamic range narrower.
Select a setting using [U\D], then
press [ENTER].
Your setting is activated.
“Dynamic Range Control” function is effective
only with analogue audio connection.
Note
• “Dynamic Range Control” function is available only
on discs recorded in the Dolby Digital format.
Select a setting using [U\D], then
press [ENTER].
Your setting is activated.
Note
When playing back a disc with copyright protection:
• Even if you select “96kHz”, the sound is down
sampled to 48 kHz.
Select a setting using [U\D], then
press [ENTER].
Your setting is activated.
Hint
When playing back a DVD-RW disc recorded in VR
mode:
• If the audio source on a disc is in Dolby Digital
format, set “Dolby Digital” to “PCM” so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.
Select a setting using [U\D], then
press [ENTER].
Your setting is activated.
Select a setting using [U\D], then
press [ENTER].
Your setting is activated.

3. Disc Menu Language (Default: English)

(DVD only)
Set “Disc Menu Language”.
Select a setting using [U\D], then
press [ENTER].
Your setting is activated.

4. Audio Language (Default: Original)

(DVD only)
Set “Audio Language”.
Select a setting using [U\D], then
press [ENTER].
Your setting is activated.
If “Original” is selected, the audio language is the
default of the inserted disc.
Dynamic Range Control (Default: ON)
(DVD only)
PCM sampling (Default: 48kHz)
48kHz: If your amplifier / decoder is NOT
compatible with 96 kHz PCM, select
“48kHz”. Sound recorded at 96 kHz is
down sampled to 48 kHz.
96kHz: If your amplifier / decoder is compatible
with 96 kHz PCM, select “96kHz”. Sound
is sampled at 96 kHz.
Dolby Digital conversion (Default: Stream)
PCM: Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT
compatible with Dolby Digital, set to
“PCM”.
Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible
with Dolby Digital, set to “Stream”.
Dynamic Range Control
ON
OFF
PCM
48kHz
96kHz
Dolby Digital
PCM
Stream
Settings for MPEG (Default: PCM) (DVD only)
PCM: Converts MPEG into PCM.
If your amplifier / decoder is NOT
compatible with MPEG, set to “PCM”.
Stream: Outputs MPEG Audio signals.
If your amplifier / decoder is compatible
with MPEG, set to “Stream”.
Settings for DTS (Default: ON) (DVD only)
ON: Outputs DTS signals.
If your amplifier / decoder is compatible
with DTS, set to “ON”.
OFF: No DTS signal is output.
If your amplifier / decoder is NOT
compatible with DTS, set to “OFF”.
MPEG
PCM
Stream
DTS
ON
OFF
Disc Menu Language
English
French
Spanish
German
Italian
Swedish
Dutch
Other
Audio Language
Original
English
French
Spanish
German
Italian
Swedish
Dutch
Other
Introduction Connections Basic Setup Playback Editing OthersFunction SetupRecording VCR Functions
E3LG0ED_EN.book Page 75 Wednesday, April 30, 2008 11:52 AM