12 EN

Rear Panel

1 Mains cable
Connect to a standard AC outlet.
2 HDMI OUT jack (HDD/DVD)
Connect to a display with an HDMI compatible
port. Use a commercially available HDMI cable.
3 DIGITAL AUDIO OUT (COAXIAL) jack
(HDD/DVD)
Connect to an amplifier with a digital input jack
such as a Dolby Digital decoder, DTS decoder
or MPEG decoder. Use a commercially
available Coaxial cable.
4 AUDIO OUT (L\R) jacks (HDD/DVD)
Connect to the audio input jacks on your TV.
Use a commercially available Audio cable.
5 COMPONENT VIDEO OUT jacks
(HDD/DVD)
Connect to the component video input jacks on
your TV. Use a commercially available
Component Video cable.
6 AV2 (DECODER) socket (HDD/DVD/VCR)
Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.
7 AV1 (TV) socket (HDD/DVD/VCR)
Connect to the Scart socket on your TV. Use a
commercially available Scart cable.
8 ANTENNA IN
Connect to an antenna or a cable.
9 ANTENNA OUT
Connect to the Aerial jack on your TV, cable box
or direct broadcast system to output the signal
received at ANTENNA IN. Use the supplied RF
cable.
Note
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.

This unit does not have an RF modulator.

HDMI OUT

1 3 456 87 92

E3LG0ED_EN.book Page 12 Wednesday, April 30, 2008 11:52 AM