Toshiba RD-XV48KE VCR Functions, Recording and One-touch Timer Recording OTR, Basic Recording

E3LG0ED_EN.book Page 81 Wednesday, April 30, 2008 11:52 AM

VCR Functions

Introduction

Playback

VCR

1 Press [B ON\STANDBY] to turn on the unit.

To play back a tape, turn on the TV and be sure to select the input to which the unit is connected.

2 Press [VCR].

3 Insert a pre-recorded tape, then press [PLAY B] to begin playback.

4 During playback, press [PAUSE F].

Playback will be paused and sound will be muted.

5 Press [PLAY B] to resume playback.

6 Press [STOP C] to stop playback.

7 Press [OPEN\CLOSE A] to eject the tape.

Note

•When a tape without record tab is inserted, the unit will start playback automatically.

•Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press [PROG. G \ H].

Recording and One-touch Timer Recording (OTR)

Basic Recording

VCR

Before recording, make sure:

• The desired channel is selected by pressing

[the Number buttons] or [PROG. G \ H] on the remote control.

• There is a tape with a record tab in the unit.

Tape speed		Recording / Playback Time
	Type of tape	E60	E120	E180	E240
	SP mode	1 hour	2 hours	3 hours	4 hours
	LP mode	2 hours	4 hours	6 hours	8 hours

1 Turn on the unit and insert a recordable videotape.

Make sure that the TV input is set on the unit.

2 Press [VCR].

3 Select the recording mode using [REC MODE].

•The desired recording mode is selected in SP (standard play) or LP (long play) mode by pressing [REC MODE].

4 Select the desired channel to record using [PROG. G \ H] or

[the Number buttons].

5 Press [REC I] to start recording.

To temporarily stop recording or to resume it, press [PAUSE F].

After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

6 Press [STOP C] when the recording is completed.

EN 81

Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others