User’s Manual 4-23
Operating Basics
How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:
1. Click Start -> All Programs -> InterVideo WinDVD Creator2 ->
InterVideo WinDVD Creator to launch WinDVD Creator.
2. Click Capture button then capture the video data from the DV-
Camcorder via IEEE1394.
3. Click Edit button then drag the video clips from Video Library tab to
the edit track.
4. Click Make Movie button in the top bar.
5. Double Click the Right arrow button icon in the center of right side.
6. Put a blank DVD-R/+R disc or an erased DVD-RW/+RW disc in the
drive.
7. Click Start to record to the disc.
8. When recording is finished, the tray opens.
How to learn more about InterVideo WinDVD Creator
Please refer to the on-line Help for additional InterVideo WinDVD Creator
information.
Important information for use
Note the following limitations when you write to a video DVD:
1. Editing digital video
■Log in with Administrator rights to use WinDVD Creator.
■Make sure that your computer is running on AC power when using
WinDVD Creator.
■Operate the computer at Full Power. Do not use power-saving
features.
■While you are editing a DVD-Video, you can display previews.
However, if another application is running, the preview might not
display properly.
■WinDVD Creator cannot show video on the external monitor when in
simultaneous mode.
■WinDVD Creator cannot edit or play copy protected content.
■Do not change display settings while using WinDVD Creator.
■Do not enter standby/Hibernation Mode while using WinDVD
Creator.
■Do not operate WinDVD Creator immediately after turning on the
computer. Please wait until all disk/disc drive activity has stopped.
■When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
■CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.