User’s Manual 4-31
Operating Basics
Security
■TOSHIBA strongly recommend that you enable WEP (encryption)
functionality, otherwise your computer will be open to illegal access by
an outsider using a wireless connection. If this occurs, the outsider may
illegally access your system, eavesdrop, or cause the loss or
destruction of stored data.
■TOSHIBA is not liable for the loss of data due to eavesdropping or
illegal access through the Wireless LAN and the damage thereof.
Bluetooth wireless technology
Some models in this series are equipped with Bluetooth™ wireless
technology that eliminates the need for cables between electronic devices
such as desktop computers, printers and mobile phones.
You cannot use the built-in Bluetooth functions and an optional Bluetooth
SD card 3 simultaneously.
Bluetooth wireless technology has the following features:

Worldwide operation

The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band,
which is license-free and compatible with radio systems in most countries
in the world.

Radio links

You can easily establish links between two or more devices. The link is
maintained even if the devices are not within line of sight.
■The Wake-up on Wireless LAN function consumes power even when
the system is off. Leave the AC adaptor connected while using this
feature.
■The values shown above are the theoretical maximums for Wireless
LAN standards. The actual values may differ.
■The transmission speed over the Wireless LAN, and the distance over
which the Wireless LAN can reach, may vary depending on
surrounding electromagnetic environment, obstacles, access point
design and configuration, client design and software/hardware
configurations. The transmission rate described is the theoretical
maximum speed as specified under the appropriate standard - the
actual transmission speed will be lower than the theoretical maximum
speed.
■The Wake-up on Wireless LAN function is effective only when it is
connected with AP. This function becomes invalid when the connection
is cut.
■The Wake-up on Wireless LAN function is not available in battery
mode.