Toshiba Tecra A8, SATELLITE PRO A120 manual Cd-Rom

			Troubleshooting
CD-ROM drive
	Problem	Procedure
	You cannot access a	Make sure the drive’s disc tray is securely
	CD in the drive	closed. Press gently until it clicks into place.
		Check whether the drive power is on. If the
		power is off, click on the optical disk drive icon in
		the task tray and turn on the power.
		Open the disc tray and make sure the CD is
		properly seated. It should lie flat with the label
		facing up.
		A foreign object in the disc tray could block laser
		light from reading the CD/DVD. Make sure there
		is no obstruction. Remove any foreign object.
		Check whether the CD is dirty. If it is, wipe it with
		a clean cloth dipped in water or a neutral cleaner.
		Refer to the Media care section in Chapter 4 for
		details on cleaning.
	Some CDs run	The software or hardware configuration may be
	correctly, but others do	causing a problem. Make sure the hardware
	not	configuration matches your software’s needs.
		Check the CD’s documentation.
		Check the type of CD you are using. The drive
		supports:
		CD-ROM:	CD-DA, CD-Text, Photo CDTM
			(single/multi-session), CD-

ROM Mode 1, Mode 2, CD-

ROM XA Mode 2 (Form1,

Form2), Enhanced CD (CD-

EXTRA), Addressing Method 2

Recordable CD: CD-R, CD-RW

User’s Manual 9-9