Toshiba SATELLITE PRO A120 Removing a memory module, Be sure that the cover is closed firmly

Optional Devices

Align the grooves along the edges of the memory module with the locking tabs on the connector and insert the module into the connector firmly. If you find it difficult to install the memory module, gently prize the locking tabs outwards using the tip of your finger. Ensure that you hold the memory module along its left and right hand edges - the edges with the grooves in.

■Never allow metal objects, such as screws, staples and paper clips, to enter the PC or keyboard. Foreign metal objects can create a short circuit, which can cause PC damage and fire, possibly resulting in serious injury.

■Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

7.Seat the memory module cover and secure it with one screw.

Be sure that the cover is closed firmly.

Screw

Memory module cover

Figure 8-7 Seating the memory module cover

8.Install the battery pack. Refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, for details.

9.Turn your computer over.

10.Turn the power on and make sure the added memory is recognized. Click start, click Control Panel, click Performance and Maintenance and select the System icon. Open System Properties window and click General tab.

Removing a memory module

To remove the memory module, make sure the computer is in boot mode then:

1.Set the computer to boot mode and turn the computer’s power off. Make sure the Power indicator is off.

2.Remove AC adaptor and all cables connected to the computer.

8-8 User’s Manual