Toshiba SATELLITE PRO A120, Tecra A8 manual View numbers in blacklist, Cn Data compression control

AT Commands

\V1 Enable protocol result code appended to DCE speed (default).

Result Codes: OK n=0,1 ERROR Otherwise

%B View numbers in blacklist

If blacklisting is in effect, this command displays the numbers for which the last call attempted in the past two hours failed. The ERROR result code appears in regions that do not require blacklisting.

%Cn Data compression control

This command determines the operation of V.42bis and MNP class 5 data compression. On-line changes do not take effect until a disconnect occurs first.

%C0 V.42bis/MNP 5 disabled. No data compression.

%C3 V.42bis/MNP 5 enabled. Data compression enabled (default).

Result Codes: OK n=0,3 ERROR Otherwise

C-10 User’s Manual