Toshiba TDP-MT700 owner manual Controls and functions, Control panel, Remote control

English

Controls and functions

Control panel

	6
	7
	8
1	9
2	3
3
	10
4	11
5

1.POWER indicator light p. 32

Lights up or flashes when the projector is under operation.

2.MEMORY c p. 23

Sequentially recalls settings saved in memory locations 1, 2, and 3.

3.ARROWS (e/f)

When the on-screen menu is activated, the #2, #3, and #10 are used as directional arrows to select the desired menu items and to make adjustments.

4.ON/STANDBY p. 20 , p. 24 , p. 32 Press and hold this button to turn the projector on when it is in the standby mode. Or press this button twice to turn the unit off.

Remote control

Notes on remote control operation

5.MENU

Turns the on-screen display control menu on. Exits and saves the menu settings.

6.Focus Ring p.21

Adjusts the focus of the projected image.

7.Zoom Ring p.21

Adjusts the size of the projected image

8.Temperature warning light p.32

Lights up or flashes red if the projector’s temperature becomes too high.

9.LAMP indicator light p.32

Indicates the status of lamp.

Lights up or flashes red when the lamp has developed a problem. Please contact your dealer for assistance.

10. AUTO d

Automatically determines the best picture timings for the displayed image.

11. INPUT p.26

Switches input sources sequentially.

Make sure that there is nothing between the remote control and the IR sensor on the projector that might obstruct the infrared beam.

The effective range of the remote control is up to 8 meters from the front of the projector or 8 meters from the rear of the projector. The remote control must be held at an angle within 45 degrees of the projector’s IR remote control sensor.

8 m

If the remote control stops working, or if its effective range decreases, replace the batteries with new ones.

Overview 13