Toshiba TDP-MT700 owner manual Water and Moisture, Cleaning, Power-Cord Protection, Overloading

7.Water and Moisture

Do not use this product near water.

- for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet base- ment; or near a swimming pool and the like.

8.Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft cloth for cleaning.

9.Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, conve- nience receptacles, and the point where they exit from

the product.

10.Overloading

Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

11.Do not use the product in a closed installa- tion state.

Do not place the product in a box or in any other closed installation state. Otherwise it may overheat. This could result in a risk of fire.

12.Lightning storms

For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. However, while it is thundering or light- ning, do not touch the apparatus and any con- nected cable and/or equipment. This will prevent you from receiving the electric shock by an electric surge.

13.Object and Liquid Entry

Never push objects of any kind into this prod- uct through openings as they may touch dan- gerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

14.Do not place the product vertically

Do not use the product in the upright position to project the pictures at the ceiling, or any other vertical positions. It may fall down and dangerous.

15.Do not leave thermal-paper documents or easily deformed items on top of the unit or near the air exhaust for long periods of time.

The heat from the unit could erase the infor- mation on the thermal paper, or cause defor- mation or warping.

4 IMPORTANT SAFETY INSTRUCTIONS