IMPORTANT SAFETY INSTRUCTIONS 3
English
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in elec-
tric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the follow-
ing procedures for installation, use and servicing. This unit is fully transistorized and does not contain any
parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read Owner's Manual
After unpacking this product, read the owner's
manual carefully, and follow all the operating
and other instructions.
2. Power Sources
This product should be operated only from
the type of power source indicated on the
marking label. If you are not sure of the type
of power supply to your home, consult your
product dealer or local power company. For
products intended to operate from battery
power, or other sources, refer to the operating
instructions.
3. Source of Light
Do not look into the lens while the lamp is on.
The strong light from the lamp may cause
damage to your eyes or sight.
4. Ventilation
Openings in the cabinet are provided for ven-
tilation and to ensure reliable operation of the
product and to protect it from overheating,
and these openings must not be blocked or
covered. The openings should never be
blocked by placing the product on a bed,
sofa, rug or other similar surface. This prod-
uct should not be placed in a built-in installa-
tion such as a bookcase or rack unless
proper ventilation is provided or the manufac-
turer's instructions have been adhered to.
5. Heat
The product should be situated away from
heat sources such as radiators, heat regis-
ters, stoves, or other products (including
amplifiers) that produce heat.
6. Replacement Parts
When replacement parts are required, be
sure the service technician has used replace-
ment parts specified by the manufacturer or
have the same characteristics as the original
part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
(Replacement of the lamp only should be
made by users.)