Toshiba TDP-TW355 Using handy features, Easy setup, Correcting the keystone distortion

Using handy features

■Easy setup

This function automatically adjusts the screen focus and corrects the keystone distor- tion (Auto focus and Auto keystone functions).

Press the EASY SETUP button on the		Control panel	Remote
projector or on the remote control.			Control
The icon	will appear during processing.		EASY SETUP
• Before pressing the EASY SETUP button, be		2
sure to set Auto focus and select the items to		1
be adjusted by Auto adjustment p.44 .
• With [Easy setup] in the Default setting
menu set to [On], the screen focus is

automatically adjusted and the keystone

distortion (vertical and horizontal) is corrected when the power is turned on. (Automatic keystone distortion correction and auto-setting are selected by factory setting.)

Notes

•A message appears on the screen if the auto-adjustment fails.

•Auto focus and Auto keystone functions are effective for projecting size from 40” to 100” diagonal (projection distance: 1.17 m to 3 m) at maximum zoom and 40” to 66” diagonal (projection distance: 1.79 m to 3 m) at minimum zoom.

Precautions

•Depending on the room temperature and brightness as well as the projecting surface condition and material, the adjustment may not be properly made. When such a case arises, adjust the screen focus manually.

•Improper adjustment or correction may also occur if the AF sensor is obstructed or the window gets dirty. Remove the obstruction and clean the AF sensor window in such a case.

■ Using auto setting (Only for analog input from computer)		Remote
This function sets up the projector to the optimum state such as		Control
sampling phase, frequency, screen position, and clamp for each		EASY SETUP
type of the input signal by using simple operations.
Press the remote control’s AUTO SET button.
For computer input, the	icon will appear during processing.

You can set as well by selecting [Auto setting] in the Image adjustment menu p.39 .

Notes

•The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.88 , p.89 .

•If auto setting fails adjustment, adjust manually with the Image adjustment menu

p.39 .

■ Correcting the keystone distortion

When the projector placement angle against the screen is changed while projecting the
image, the picture will undergo keystone (trapezoidal) distortion.		Remote
This projector is capable of correcting this keystone	Control panel
		Control
distortion.
		EASY SETUP
Before correction After correction

1Press the KEYSTONE button.

The Keystone menu appears. By default, [Auto keystone] is selected.

Item			Description
Auto keystone	Automatically corrects vertical and horizontal keystone distortion.
	Press	.
V-keystone	Screen shrinking at bottom		Screen shrinking at top
H-keystone	Screen shrinking on the left		Screen shrinking on the right

to select [V-keystone], and adjust with the			buttons.		Operations
Adjusting vertical distortion [Auto]
2 Press the	button.
The vertical and horizontal keystone distortion is automatically corrected. During
processing, the icon		will appear. When the processing is finished, the Key-
stone menu appears again. If you wish to make fine adjustment, use the				button

Adjusting vertical distortion [Manual]

1Press the KEYSTONE button.

2Select [V-keystone] by the button.

3Use the buttons for keystone adjustment.

Adjusting horizontal distortion [Manual]

1Press the KEYSTONE button.

2Select [H-keystone] by the button.

3Use the buttons for keystone adjustment.

When the adjustment is finished, the menu	Before correction After correction
automatically disappears. The menu also disap-
pears when the KEYSTONE or RETURN button is
pressed.

30 31