Label locations
OR
Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Parts on the rear panel |
| ||
(1) (2) (3)(4) | (5) | (6)(7)(8) (9) (11) (12) (13) | ■ Removing the slot |
|
| (10) | cover |
|
| Press on the circle (“O”) while | |
|
|
| |
|
|
| sliding the cover in the |
|
|
| direction of the arrow. The |
|
|
| cover will come off. |
(14) (15) (16) (17)
Do not carry the projector by having the slot cover part.
CAUTION Doing so may cause that cover to come off, resulting in the projector malfunction, injury or damage.
Parts on the rear panel (Continued)
| Name | : Main Function |
(1) | Infrared remote sensor | : Senses commands from the remote control. p.20 |
(2) | CONTROL terminal |
|
| LAN : Connects a network cable. | |
| RS232C : When operating the projector via a computer, connect | |
|
| this to the controlling computer’s |
(3) | COMPUTER (Y/PB/PR) 2 IN terminal | |
| RGB : Input analog RGB signal from a computer or other | |
|
| source, or a component video signal (Y/PB/PR) from |
|
| video equipment. |
| AUDIO : Input audio signals. | |
(4) | COMPUTER (Y/PB/PR) 1 IN terminal | |
| ||
|
| a component video signal (Y/PB/PR) from video |
|
| equipment. |
| AUDIO : Input audio signals. | |
(5) | MONITOR terminal | : Connect to a computer display, etc. |
(6) | AUDIO OUT terminal | : Outputs audio signals. |
(7) | COMPUTER (Y/PB/PR) 3 IN terminal | |
| BNC : Input G/B/R/HD/VD signal from a computer, or a | |
|
| component video signal (Y/PB/PR) from video |
|
| equipment. |
| AUDIO : Input audio signals. | |
(8) | CARD indicator | : Displays PC card’s status. p.49 |
(9) | UNMOUNT button | : Press before removing PC card. p.49 |
(10) RESET switch (inside depression) : Press if CARD indicator turns red. p.49 | ||
(11) Eject button | : Press to remove PC card. p.49 | |
(12) PC card slot | : Insert PC cards here. p.49 | |
(13) USB terminal | : Connects a commercial USB memory. p.50 | |
(14) CAMERA POWER terminal | : DC power supply terminal (+15 V). Reserved for future | |
|
| use. |
(15) VIDEO IN terminal |
| |
VIDEO : Input video signals from video equipment. AUDIO (L/R) : Input audio signals from video equipment.
: Connect the supplied power cord here.
: AC power line ON (standby)/OFF.
Preparations
18 | 19 |
