Toshiba TDP-TW420 owner manual Display setting menu

Using the menus 1 (Continued)

N The display setting menu

Use this menu to set screen display-related items.

(The items in gray color cannot be set with the current input selection.)

Item

Description

Screen size

Screen size setting

[

or

: Enter setting]

[

:Selection]

[Enter:

]

Normal/Full/Thru/Wide

Up/down

Lets the projected images shift vertically when the screen size setting is wide

shift

display (within the range of 1024 × 768).

Lower the image

Raise the image

Language

Select one of the languages below to use for displaying the menu and messages

[

or

: Enter setting]

[

:Selection] [Enter:

]

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/ Indonesia

Background

Screen to display when there is no input signal

[

or

: Enter setting]

[

:Selection]

[Enter:

]

Logo/Blue/None

Icon

Display icons as function guides

On

Off

Start-up

Display start-up screen when power is turned on

On

Off

screen

User logo Display a logo customized by the user for the start-up screen or when there is no input signal.

[ or : Enter setting] [: Selection]

Logo registration Press to display the registration menu.

Display style

Logo confirmation	Press .
Reset logo	Yes	No

Detailed description [Screen size]

•	Normal	: Enlarge an input image to fit the screen without changing the aspect
		ratio of video signals.
•	Full	: Displays an input image in 1024 × 768 dot resolution by enlarging it
		to fill the entire screen.
•	Thru	: Displays an input image in the native resolution of the video signals.
		Thru display is not available for Y/PB/PR, Video and S-Video-input
		images.
		The larger image than the screen size will be displayed over the
		screen. The input image may appear vertically long with some
		frequencies of video signals.
•	Wide	: Displays an input image in the center of the screen with a 16:9 aspect
		ratio by enlarging it to fit the width of the screen. The upper and lower
		portions of the image will be compressed.
		Wide display is not available for Computer and Network-input images.

•For Y/PB/PR input, screen size setting function is not available for the video signals with a 16:9 aspect ratio.

•For the Network-input images, the size can be set only when the image is

displayed. The size setting is not available when the projector is connected to your computer using the Network Projector (Windows Vista®) function. It may fail to display the image to fill the entire screen with some input image sizes.

•For the USB memory-input images, the size cannot be set.

Note

•If you use the screen size setting function on commercial video software, broadcast or cable-broadcasting programs to display images with the varying aspect ratio except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws.

[Up/down shift]

Shifts the projected image vertically when [Screen size] is [Wide].

[Background]

•TOSHIBA is set for [Logo] by factory setting.

•If user’s logo has been registered, it is displayed when [Logo] is set for background.

[Start-up screen]

If user’s logo has been registered and this setting is [On], the logo is displayed at start-up.

[User logo]

Registers a part of the image that is input from computer, as a stationary picture and displays it as a logo at start-up and when no signal is input.

Operations

38 39