Using the menus 1 (Continued)
<Logo registration>
How to register user logo
1Project a picture to register.
2Select [User logo] in the Display setting menu, and press the or button.
3Select <Logo registration> from the displayed menu list and press the button.
4The registration area is displayed for confirmation. Select [OK] and press the button.
•If the registered picture does not fall within the display area, operate the computer to scroll the screen.
5Registration starts.
•A message will appear after the registration has been completed.
•To stop the registration, press the RETURN button.
Notes
• You can register a logo when the input is set to Computer, Network and USB |
memory. |
• For the |
• For the USB |
displayed. |
• If you register a logo after keystone distortion or digital zoom has been adjusted, |
those adjustments will be reset to their factory settings. However, once the logo |
registration is complete, they will return to the adjustments that you made. |
• The area that can be registered is 512 × 384 dots at the center of the screen. To |
N The Default setting menu
This menu shows placement status and other settings.
Default setting 1 menu
|
| Item |
| Description |
|
|
|
|
|
|
|
|
|
|
| Keystone | Screen shrinking at bottom | Screen shrinking at top |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| Auto keystone | Always correct keystone distortion automatically. | On | Off | |
|
|
|
| |||
|
| Blackboard | When projecting on a | |||
|
| mode | the projecting surface. |
|
|
|
|
|
| Press and switch with and | . Off/Green/Black/Brown/Blue/Beige | ||
|
|
|
| |||
|
| No signal | Set the time to wait for the power to be turned off after the last operation is | |||
|
| power off | made with no input signal. | On (not turned off) |
| 30 min. |
|
| Auto input | Set whether the input with signals is only selected or not. | On | Off | |
|
| search | ||||
|
|
|
|
|
| |
|
| Beep | Beep when operation is made. |
| On | Off |
|
|
|
| |||
|
| Power on | Sets whether to turn on the power when the ON/STANDBY button is pressed | |||
|
|
| (Manual), or when the main power switch is turned on (Auto). |
|
| |
|
|
|
| Manual | Auto |
Detailed description [Blackboard mode]
Projects the image in colors more like projecting on a screen.
Precaution
•The projected image may differ depending on the type, color, and material of the blackboard and wall even if the selected color is the same as the projected screen.
Operations
register a company logo, prepare the image within the limit. |
• Only one logo can be registered. When a new image is registered, the old one is |
erased. |
• The time needed to register or display the image varies depending on the data size. |
• If you use this function on commercial video software, broadcast or cable- |
broadcasting except for the purpose of your private viewing and listening, it may |
infringe the copyright protected by the copyright laws. |
<Display style>
Select the size of the registered logo.
: Displays the registered image in original size at center of the screen.
: Displays the registered image by enlarging fully in the screen. (As processed digitally, the image quality is degraded.)
<Logo confirmation>
You can preview the registered logo.
[Auto input search]
[On]: Automatically searches the signals that can be projected, and switches input from the connected device that outputs the video signals each time the INPUT button is pressed. The input from the connected device that outputs no video signals is skipped.
[Off]: Displays the Input select menu.
Toggle with buttons and press
button. (The input without signals can be also selected.)
Note
•In normal operation, set [Auto input search] to [On]. Set to [Off] when you want to select the input source from Input select menu, or if the image does not appear properly.
Input select menu
Input select
Computer 1 (Digital)
Y/PB/PR 1 (Digital)
Computer 1 (Analog)
Y/PB/PR 1 (Analog)
Computer 2
Y/PB/PR 2
Video
Network
USB memory
/ shows whether signal is input or not.
<Reset logo>
You can reset the registered logo and display style to the factory setting. (The logo set for the
[Power on]
If [Power on] is set to [Auto] and there is a power outage, the projector will come on once power is restored.
40 | 41 |