Toshiba TDP-TW420 owner manual Connection, Before connection, Connecting with computers

Connection

Before connection

•Read the owner’s manual of the device you are connecting to the projector.

•Some computers cannot be used with or connected to this projector. Check for an RGB output terminal, supported signal p.97 , etc.

•Turn off the power of both devices before connecting.

•The figures below show sample connections. This does not mean that all of these devices can or must be connected simultaneously.

Connecting with computers

Computer

Computer

To RGB output	To audio	To DVI output	To audio output
	output	DVI cable	Audio cable
RGB cable	Audio cable
		(not supplied)	(not supplied)
	(not supplied)
(supplied)

	RGB cable	Audio cable
Control cable	(not supplied)	(not supplied)
(not supplied)
To RS-232C
terminal	Monitor	To audio input
Computer
(for control)		Speaker with built-in amplifier

Notes

•The MONITOR OUT terminal outputs analog RGB signals from the COMPUTER 1 IN terminal or the COMPUTER 2 IN terminal, or outputs Y/PB/PR signals as selected with the INPUT button. If no input is selected, the MONITOR OUT terminal outputs the input signals last selected for each input terminal. (Digital RGB signals will not be output.)

•Signals are output from MONITOR OUT ter minal even in standby mode. However, from AUDIO OUT terminal, no audio signal is output.

•A computer monitor cannot accept Y/PB/PR signals correctly.

Connecting with AV equipments

	DVD video recorder,
	DVD player, etc.	DVD video recorder, etc.
	To Y/CB/CR	To audio To DVI output	To HDMI output	To audio	Preparations
Mini D-sub
Conversion adapter	outputGreen	output		output
BNC-pin (not supplied)
	(Y)/Blue	White (L)/		White (L)/
	(CB)/Red (CR)	Red (R)	Conversion	Red (R)
		DVI cable	adapter	Audio cable
		29-pin	HDMI-DVI	(not supplied)
		(not supplied)	(not supplied)
		Audio cable
Monitor cable		(not supplied)
15P-BNC
(not supplied)

Audio cable

(not supplied)

AV cable

	(not supplied)	S-video cable
		(not supplied)
	To audio output
	White (L)/ Red (R)
To audio input	To video output	To S-video
White (L)/ Red (R)	(yellow)	output
Audio amplifier, etc.	Video recorder, etc.

Notes

•The AUDIO (L/R) terminal doubles for devices connected to S-VIDEO terminal and VIDEO terminal.

•When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.

•Output volume of AUDIO OUT terminal can be adjusted by the VOL button.

22 23