Toshiba TDP-TW420 Displaying computers screens via projectors using Multiscreen function,

68 69

Network and

USB memory

Displaying computer’s screens via projectors using

Multiscreen function

Launch the Network Utility

software application.

The Screen Image transmission mode window

appears on the computer’s screen.

Click on the Multiscreen icon .

The Network Utility window changes to

Multiscreen transmission mode.

Select Transmission mode.

Click on Update automatically or Update manually. See step

for the meanings of

Update automatically and Update manually.

Click on the Advanced button.

The Multiscreen: Advanced Settings dialog

appears. Set the dialog as shown below, as

necessary.

Interruption

Check the No Interruptions checkbox to

prevent other computers from interrupting the

projector, for example, during presentation.

Window Display

Select the Place in Tasktray at the start

of transmission checkbox to iconify the

Network Utility and place it in the computer’s

tasktray when transmission initiated.

To display the window, double click on this

icon, or right click and select Open from the

popup menu. Even with the Network Utility

window minimized, you can use the pop-

up menu to stop or resume transmission as

described in step

and later.

Transmission Mode (Image)

Selecting High quality improves the quality of the projected image, but lowers

communication speed. Selecting High speed has the opposite effect.

Transmission Mode (Sound)

Check the Transmit sound to a projector (Only when connected with one

projector) checkbox to transmit the sound being played on a computer to the

projector.

Note: The sound can be sent when only one projector is connected.

■

•

Network Mouse Controller

Check the Control computer mouse pointer using remote control (Only when

connected with one projector) checkbox to control computer mouse pointer

with Mouse control button, PAGE+ button, PAGE - button, L-CLICK button and

R-CLICK button of the computer’s remote control.

Note 1: This function is available when only one projector is connected to computer.

Note 2: When you use the Network Mouse Controller function, do not connect the

mouse remote control receiver to your computer. The function will fail to

operate properly.

Select the Transmission Image you

wish the projector to display.

Select Desktop

The computer screen image is transmitted as-is.

Select application window

Select a running application (e.g. Microsoft

PowerPoint

), and send that application’s

window only.

The desktop and a list of running applications are displayed.

Select the desired application from this list. (If the desired

application is not on the list, launch it. Note that if too many

applications are running, it will consume the computer’s

resources, which could slow communication speed.)

Arrange the virtual display layout.

1Clicking on the Display Properties button in

the Control window displays the window for

screen display settings.

2Right click on the desired virtual display

(Toshiba DPJ Secondary Display Driver) and

select Attached from the popup menu.

3Allocate screen displays by drag and drop

monitor icons.

4Click OK button in the window for screen

display settings, then the Screen Layout

in the Control window will be updated

accordingly.

When you check Switch to the last screen

settings when using next time. the virtual

display layout that has been set will be memorized

upon exit from Network Utility and it will switch

to the screen settings the next time you use the

Multiscreen feature.

•

Using the Network Utility (Continued)