Using the Network Utility (Continued)
3Click on the Advanced button.
The Movie file: Advanced Settings dialog appears. Set the dialog as shown below, as necessary.
•Interruption
Check the No Interruptions checkbox to prevent other computers from interrupting the projector, for example, during presentation.
•Transmission Mode (Sound)
Check the Transmit sound to a projector (Only when connected with one projector) checkbox to transmit the sound being played on a computer to the projector.
•Autostart
Check the Start playing the file automatically when starting transmission checkbox to automatically start playing the video file when connecting to the projector.
•Repeat
Check the Play repeatedly after the end of playing checkbox to automatically repeat from the beginning when the file reaches the end.
4Click on the Browse button and select the file to send.
Clicking on the Browse button displays the Open dialog box. Select the file to send then click on the Open button.
The selected file is added to the
5Select the file to send from the pull- down list of the Transmission File field.
Click on the Transmission File field’s 
button to display the
A thumbnail of the selected file appears in the Preview box. The file displayed here will be transmitted.
Step 4 can be skipped.
The way that drag and drop the file to send from the desktop or Windows Explorer into the Preview box is also available. In this case as well, the selected file is added to the
Note
• You may not select a file by drag and drop with Windows Vista®.
6Select the projector to transmit to.
The IDs of projectors accessible for transmission will be listed. (If projector name has been set up already, it is shown.) Select the checkbox of the projector to be transmitted to from this list. Then
icon 
is displayed on the projector's screen for few seconds.
It is possible to select only one projector.
7Click on the 
button.
The selected file's image is displayed by the projector and the Control window appears as well.
8Play the video file via the Control window.
The function of each button and box is as follows:
Current position: Indicates the playing position. Dragging the slider can move the playing position.
Play:Starts playing the video file.
Freeze:The picture is paused.
Stop:Stops playing the video file.
Volume:Adjusts sound volume.
Mute:Cuts off picture and sound.
Release mute: Restores picture and sound.
Notes
• Only one file can be sent at a time. To send another file, repeat steps 5 and 7 .
•MPEG/AVI/ASF/WMV files can be transmitted.
•The update speed of the transmitted file depends on your computer's performance and the surrounding radio environment.
•The projector ID is the MAC address of the wired LAN mounted on the projector.
•The audio signals transmitted by a computer become mono.
•Playing contents protected by copyright is not supported.
Network and USB memory
66 | 67 |
