Olivetti 3501MF, 4501 Select the paper tray for the cover, When using the document glass

SPECIAL MODES

5 Select whether or not you wish to copy on the cover ("YES" or "NO").

PRINT ON COVER

YES NO

6 Select the paper tray for the cover.

(1)The currently selected

	CANCEL			OK	paper tray	for	the
		PAPER TRAY			cover is displayed.
(1)					(2)The size and type of
			TRAY2
					paper in the currently
(2)			A4
					selected	tray	is
			PLAIN

displayed.

In the example screen above, A4 (8-1/2" x 11") size plain paper is loaded.

To change the paper tray for the cover, touch the tray selection key. (In the screen example, the " TRAY2" display is the tray selection key.)

The tray selection screen appears when the tray selection key is touched. Select the desired tray in this screen.

NOTES

Two-sided copying is not possible on label sheets, and transparency film. When copying on a cover, do not select a tray that has one of these types of paper.

Select the same size of paper for the covers as for the copies.

7 Touch the [OK] key.

CANCEL	OK
RIGHT
G BINDING
	COVER
	SETTING

8 Touch the [OK] key.

		OK	Return to the main
	CANCEL	OK	screen of copy mode.
LEFT	RIGHT
BINDING	BINDING
		COVER
		SETTING

9 Place the original in the document feeder or on the document glass. (page 4-3)

10Ensure that the desired paper size has been automatically selected based on the original size.

				AUTO		To	select another		size
			EXPOSURE
						paper, select the desired
						size	and	touch	the
	AUTO				A3
PAPER SELECT						[AUTO IMAGE] key. The
						appropriate		copy	ratio
						will	be	selected
				100%
		COPY RATIO				automatically based on

the original size and the paper size. (See steps 2 and 3 on page 4-15.)

11Select any desired copy settings such as the exposure or number of copies, and then press the [START] key.

12[Whenfeeder:] using the automatic document

Copying will start after all originals have been scanned. (The next step is not needed.)

[When using the document glass:]

Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned and then touch the [READ-END] key.

NOTES

When the pamphlet copy function is set, the two- sided copying mode will be automatically selected.

If this function is used in combination with the pamphlet copy function (pamphlet stapling) and the number of original pages exceeds the number of pages that can be stapled, a message asking you to select "CANCEL", "CONTINUE", or "DIVIDE" will appear.

To cancel the job, select "CANCEL". To make pamphlet copies without stapling, select "CONTINUE". To divide the pages into sets that can be stapled, select "DIVIDE".

If you performed steps 4 to 6 to insert cover paper, divided stapling is not possible. You can either continue pamphlet copying without stapling, or cancel the job.

To cancel the pamphlet copy function, touch the [CANCEL] key on the pamphlet copy setting screen (step 7).

5

5-7