Olivetti 3501MF, 4501MF operation manual Calling up a job program, Deleting a stored job program

STORING, USING AND DELETING JOB PROGRAMS

Calling up a job program

1 Press the [#/P] key.

2 Touch the number key of the desired job program.

3 Set the number of copies if needed and then press the [START] key.

Copying will begin using the settings of the job program.

JOB PROGRAMS

PRESS PROGRAM NUMBER.

RECALL

Thescreen automatically closes and the job program is called up. A number key that does not have a job program cannot be selected.

Deleting a stored job program

1 Press the [#/P] key.

2 Touch the [STORE/DELETE] key.

4 Touch the [DELETE] key.

				The selected program is
				deleted and you return
	A JOB PROGRAM HAS BEEN ALREADY STORED
	IN THIS LOCATION.			to the screen of step 3.
				To return to the screen
	CANCEL	DELETE	STORE
RECALL			STORE/DELETE	of step 3 without deleting
				the job program, touch
				the	[CANCEL] key. In
				both	cases, touch the

[EXIT] key on the screen displayed in the screen of step 3 to exit the job program mode.

M NUMBER.

RECALLSTORE/DELETE

3 Select a storage register number of the program to be deleted.

		If a number key for which
	EXIT
		no	job program	has
		been stored is selected,
		the screen will change to
		the screen of step 4 on
		the	previous page	(for
STORE/DELETE

storing a job program).

NOTE

If overwriting of programmed copy settings has been prohibited in the key operator programs, you will not be able to clear a job program. (See page 15 of the key operator's guide.)

5-42