Olivetti 3501MF, 4501MF operation manual Card shot, Selected paper size

SPECIAL MODES

Card shot

When copying a card, this function allows you to combine the front and back sides on a single sheet of paper. This function is convenient for making copies for certification purposes and helps save paper.

Original					Copy
	CARD			CARD
	Front of					CARD
		card
	Back of
		card	Example:			Example:
			Portrait			Landscape
			A4 (8-1/2" x 11") size			A4 (8-1/2" x 11") size

●Copying is only possible on standard size paper.

●A copy ratio cannot be selected when using this function.

●The image cannot be rotated when using this function.

1 Touch the [PAPER SELECT] key and then select the desired paper size.

						The selected paper size
READY TO SCAN FOR COPY.
						key	is highlighted and
						the	paper selection
			1.	A4	PLAIN
						screen closes.
	A4		2.	B4	PLAIN
	PLAIN		3.	B4	PLAIN
		4.		A4
					PLAIN

NOTE

If paper of the desired size is not loaded in any tray, load paper of the required size in a paper tray or the bypass tray. (See "Setting the paper type and paper size" on page 2-5.)

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

2 Touch the [CARD SHOT] key in the special modes screen (2nd screen).

3 Enter the X dimension (width) and Y dimension (length) of the original with the keys.

CANCEL OK

SIZE RESET

FIT TO

PAGE

●X (width) is initially selected. Enter X and then touch the Y () key to enter Y.

●To return the X and Y values to the initial settings configured in the key operator programs, touch the [SIZE RESET] key. ("CARD SHOT SETTINGS" on page 15 of the key operator's guide).

●To have the images enlarged or reduced by a suitable ratio based on the entered original size so that the front and back sides fit into the selected paper size, touch the [FIT TO PAGE] key.

TRANSPARENCY	MULTI SHOT
INSERTS
CARD SHOT	MIRROR
	IMAGE

The CARD SHOT setting screen will appear. A card shot icon ( , etc.) will also appear in the upper left corner of the screen to

indicate that the function is turned on.

5-26