Olivetti 4501, 3501MF Special Papers, Load the special paper in the bypass tray, 1The X key shows

SPECIAL PAPERS

The tray 2 and the bypass tray on the optional duplex module with bypass tray can be used to make copies on transparencies, postcards, label sheets, envelopes*1, and plain paper.

*1 Envelopes can be placed in the tray 2.

1 Place the original in the document feeder tray or on the document glass. (pages 4-3 to 4-6)

5 Select the bypass tray.

READY TO SCAN FOR COPY

A4 P

A4 B4 P

PLAIN B4 P

A4 P

2 Load the special paper in the bypass tray.

Place the paper with the printed side face down. See page 2-3 for the specifications of paper that can be used in the bypass tray.

For the paper loading

instructions, see "Loading paper in the bypass tray" (page 3-3).

3 Touch the [PAPER SELECT] key.

AUTO

4EXPOSURE

AUTO A4

PAPER SELECT

100%

4 Set the type and size of paper loaded in the bypass tray.

READY TO SCAN FOR COPY

(1)The (X) key shows

6 Select any desired copy settings such as the exposure or number of copies, and then press the [START] key.

When copying from the document glass in the sort mode using the [START] key, touch the [READ-END] key after all originals have been scanned (step 8 on page 4-12).

	A4
A4	B4

P

P

the currently selected paper type.

PLAIN	B4
	A4

(X)(Y)

P(2)The (Y) key shows

Pthe size of paper loaded in the bypass tray.

(3)To change the displayed paper type, touch the

(X)key before touching the (Y) key. When loading paper, if you changed the paper size from an AB size to an inch size (or from an inch size to an AB size), or if you changed the paper type, be sure to change the paper type and size settings as explained in steps 5 to 6 on page 2- 5, and steps 7 to 10 on page 2-6.

4-20