Olivetti 4501MF, 3501MF Can only be used on the d-Copia 315 Network, To return the ratio to 100%

REDUCTION/ENLARGEMENT/ZOOM

6 Make sure that an appropriate paper size has been selected based on the selected ratio.

8 If needed, touch the [FILE] key or the [QUICK FILE] key*.

* Can only be used on the d-Copia 315 Network

ORIGINAL

AUTO

EXPOSURE

AUTO A4

Auto paper select display

version, or when the document filling function has

been added.

Either	key	can	be
touched	to	store	the

PAPER SELECT

64%

COPY RATIO

NOTE

If the auto paper select display does not appear, a tray with the correct size of paper for the selected ratio will not be automatically selected.

7 Use the numeric keys to set the desired number of copies.

Up to 999 can be set.

If you are only making a

single copy, the copy can be made with the copy number display showing

"0".

Use the [C] (clear) key to

cancel an entry if a mistake has been made.

	FILE	scanned	document
		image on the machine's
	QUICK FILE
		hard disk.	The stored
		image can be re-used
		later.
	For more information on this function, see
	"Document filing function" in chapter 7.
	If the [FILE] key is greyed out, only the [QUICK
	FILE] key can be selected.
	When you touch the [QUICK FILE] key, a message
	asking you to confirm the save will appear. Touch
	the [OK] key in the message screen and go to the
	next step.
	If you wish to cancel the save, touch the [QUICK
				4
	FILE] key after touching the [OK] key so that the
	[QUICK FILE] key is no longer highlighted.
9 Press the [START] key.

If you placed the original on the document glass, set the output to "Sort",

and pressed the

[START] key, you must touch the [READ-END] key after all pages of the

original have been scanned. (Step 8 on page 4-12)

To return the ratio to 100%

To return the ratio setting to 100%, touch the [COPY RATIO] key to display the ratio menu and then touch the [100%] key. (Steps 2 and 3 on page 4-16.)

4-17