Olivetti 4501MF STORING, Using and Deleting JOB Programs, Storing a job program, Touch the OK key

STORING, USING AND DELETING JOB PROGRAMS

The steps of up to 10 copy jobs can be stored as job programs. Job programs can be called up with ease, and are retained even when the power is turned off. By storing frequently used copy settings in a job program, you can eliminate the bother of selecting the settings each time you use them for a copy job.

If any settings related to the steps of a job program are changed in the key operator programs after the job program is stored, the steps related to the changed settings will not be included when the job program is called up.

To exit the job programs mode, press the [CA] (clear all) key on the operation panel or touch the [EXIT] key on the touch panel.

Storing a job program

1 Press the [#/P] key. 5 Touch the [OK] key.

NCEL OK

AUTO

ORIGINAL

AUTO

2 Touch the [STORE/DELETE] key.

The selected settings will be stored in the number key selected in step 3.

NUMBER.

RECALLSTORE/DELETE

3 Touch the number key ([1] to [10]) in which you wish to stored the job program.

PROGRAMS	Number		keys in	which
ESS PROGRAM NUMBER.	job	programs		are
	already		stored	are
	highlighted.
RECALL	STORE/

If a number key is selected in step 3 that has	5
already been programmed.
A setting confirmation screen will appear. To replace
the existing program with the new program, touch
the [STORE] key and continue from step 4. If you do
not wish to replace the existing program, touch the
[CANCEL] key to return to the screen of step 3 and
select a different number key.

NOTE

If overwriting of programmed copy settings has been prohibited in the key operator programs, you will not be able to store a job program. (See page 15 of the key operator's guide.)

4 Select the copy settings that you wish to store in the job program.

TO STORE, MAKE SELECTIONS AND PRESS [OK], TO DELETE, PRESS [CANCEL].

SPECIAL MODES

2-SIDED COPY

OUTPUT

A4

A4

B4

A3

The number of copies cannot be stored.

5-41