58
59
Network and
USB memory

Common

[Play icon]
The slideshow icon can be displayed.
Standard
The projector handles the slideshow icon as follows depending on the “On/Off” setting
of Icon on the projector’s menu.
Icon On: The projector displays the icon upon the start of playing a slide show and
turns it off after a few seconds.
Icon Off: The projector does not display the icon.
Continuous
The projector keeps the icon displayed during the slide show.
[Thumbnail display]
Select the form of a thumbnail list.
All: Displays a thumbnail preview of JPEG files, and if any JPEG files exist in the folder
displays the leading thumbnail image.
File: Displays only a thumbnail image of JPEG files. The thumbnail image of the JPEG
files in the folder is not displayed.
Off: Displays an icon without displaying thumbnail preview.
Note
Thumbnail image of MPEG files can not be displayed.
[Unplug device]
Run when unplugging a USB memory, a USB memory card reader/writer or a digital
camera and the like.

Checking the projector status

Status display

To check the current status of the projector, select Status display in step 2 in “Projector
settings” p.48 . The following items of information will then be displayed.
Application
The name of the application currently running on the projector is
displayed.
(Examples: Slideshow, Network Utility)
Details When inputting from USB memory
“Free space/Status” are displayed.
When inputting from network
For wireless LAN, “MAC address/Mode/Channel/SSID/
Encryption/IP address/Subnet mask/Gateway” are displayed.
For wired LAN, “Connection status/MAC address/IP address/
Subnet mask/Gateway” are displayed.
PJLink class is displayed.
Version The firmware version number of the network feature and the USB
memory feature is displayed.
•
x
x
•
•
•
N

Using the Network Projector

Setting up the projector

1

Turn the projector power on.

2

Switch the input to Network.

Make sure to set the projector’s input to Network. If the other inputs are selected, the
projector will not be recognized by the computer.
3

A password will be displayed.

A password will be displayed only when [Password] is set to [On] in the Application
category of the Network Projector settings.
4

By referring to “Using the menus 2”, make the wireless LAN or wired

LAN settings.

Setting up the computer

5

Make the wireless LAN or wired LAN settings. Please see the help

function of your computer for details.

6

Open the [Connect to a Network Projector] wizard by clicking on the

[Start] button, by clicking [All Programs], then clicking [Accessories],

finally clicking [Connect to a Network Projector].

7

Select the desired projector from the list or enter the projector address.

8

When the password is displayed in step

3

, enter the password.

Precaution

Before connection, be sure that your computer is in either condition described below.
1) The screen resolution of your computer is set in XGA (1024 × 768 dots) or lower.
2) Windows Vista SP 1 (Service Pack 1) has been installed on your computer.
N
N
Using the menus 2 (Continued)