E6581373
6.5.9. nviParamCmd (Parameter access)
Input network variable
SNVT type: SNVT_preset (94)
It is used to access the inverter parameters. Refer to section 7.5 “Parameter access method” for the example usage.
-Valid range: All accessible parameters in the inverter
-Format:
field | Length |
| Description | |
|
| Command |
| |
|
| 0 | (LN_RECALL) | : Not support |
learn | 1 byte | 1 | (LN_LEARN_CURRENT) | : Not support |
|
| 2 | (LN_LEARN_VALUE) | : Write |
|
| 3 | (LN_REPORT_VALUE) | : Read |
selector | 2 bytes | Parameter address (unsigned value) *1 | ||
value[0] | 1 byte | 0 |
|
|
value[1] | 1 byte | 0 |
|
|
value[2] | 1 byte | The most significant 2 hex bytes of data | ||
value[3] | 1 byte | The least significant 2 hex bytes of data | ||
day | 2 bytes | Invalid *2 |
| |
hour | 1 byte | Invalid *2 |
| |
minute | 1 byte | Invalid *2 |
| |
second | 1 byte | Invalid *2 |
| |
millisecond | 2 bytes | Invalid *2 |
| |
*1: This value is Hexadecimal value, but it may be displayed with decimal value on network tool.
*2: The time fields (day, hour, minute, second and millisecond) are not supported by this option unit. Any values in the time fields of the Parameter access command will be ignored.
- 26 -
