![](/images/new-backgrounds/1264312/2643125x1.webp)
E6581373
Table of Contents
1. | Scope | 4 | ||
| 1.1. | Overview | 4 | |
| 1.2. | Applicable model | 4 | |
| 1.3. | System configuration | 4 | |
2. | Names and functions of main parts | 5 | ||
| 2.1. | Outline view | 5 | |
| 2.1.1. | LIU006Z | 5 | |
| 2.1.2. | LIU007Z (for | 5 | |
| 2.2. | Diagnostics | 6 | |
| 2.2.1. | Service LED | 6 | |
| 2.2.2. | Status LED | 7 | |
| 2.2.3. | Fault LED | 7 | |
| 2.3. | RS485 communication port | 8 | |
3. | Configurations | 9 | ||
| 3.1. | Neuron ID | 9 | |
| 3.2. | Service pin | 9 | |
| 3.3. Device interface (XIF) file | 9 | ||
| 3.4. | LNS | 9 | |
| 3.5. | Inverter configurations | 9 | |
| 3.6. Command & Setpoint selection (Local/Remote) | 10 | ||
| 3.7. Reference parameter of the inverter | 11 | ||
4. | Functional profile | 12 | ||
| 4.1. Functional profile supported by this option | 12 | ||
| 4.2. | Object id | 12 | |
5. | Node Object functional block | 13 | ||
| 5.1. | Object map | 13 | |
| 5.2. Network variables (Node Object) | 13 | ||
| 5.2.1. | nciLocation (Location Label) | 14 | |
| 5.2.2. | nviRequest (Object Request) | 14 | |
| 5.2.3. | nvoStatus (Object Status) | 15 | |
6. | ACMotorDrive functional block | 16 | ||
| 6.1. | Object map | 16 | |
| 6.2. | Network variable list (VSD_6010_11) | 17 | |
| 6.3. Network variable list (the other) | 18 | ||
| 6.4. | Configuration properties | 19 | |
| 6.4.1. | nciMaxSpeed (Maximum Speed) | 19 | |
| 6.4.2. | nciMinSpeed (Minimum Speed) | 19 | |
| 6.4.3. | nciRcvHrtBt (Receive Heartbeat Time) | 20 | |
| 6.4.4. | nciSndHrtBt (Send Heartbeat Time) | 20 | |
| 6.4.5. | nciMinOutTm (Minimum Send Time) | 20 | |
| 6.4.6. | nciNmlSpeed (Nominal Motor Speed in | 21 | |
| 6.4.7. | nciNmlFreq (Nominal Motor Frequency) | 21 | |
| 6.4.8. | nciRampUpTm (Ramp Up Time) | 21 | |
| 6.4.9. | nciRampDownTm (Ramp Down Time) | 22 | |
| 6.4.10. nciDrvSpeedScale (Default value for nviDrvSpeedScale) | 22 | ||
| 6.4.11. nciPwUpOutTm (Power up delay time) | 22 | ||
| 6.5. | Input network variables | 23 | |
| 6.5.1. | nviDrvSpeedStpt (Drive Speed Setpoint) | 23 | |
| 6.5.2. | nviDrvSpeedScale (Drive Speed Setpoint Scaling) | 23 | |
| 6.5.3. | nviResetFault (Fault Reset Command) | 23 | |
| 6.5.4. | nviInvSetFreq (Frequency Setpoint) | 24 | |
| 6.5.5. nviRelay1 /nviDigitalOut1,2 (Control of Digital Output) | 24 | ||
| 6.5.6. nviDigitalOutput (Control of All Digital Outputs) | 24 | ||
| 6.5.7. nviAnalogOut1,2 (Control of Analog output) | 25 | ||
|
|
| - 2 - |
|