Archer C8 AC1750 Wireless Dual Band Gigabit Router
Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask.
Note:
1)If you change the IP Address of LAN, you must use the new IP Address to log in the router.
2)If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time, while the Virtual Server and DMZ Host will not take effect until they are
5.3Dual Band Selection
Choose menu “Advanced→Dual Band Selection”, and you can choose the working frequency for your router. It is recommended that your computers and devices running video and voice applications use the 5GHz band, while your guest access and computers that are only browsing the web use the 2.4GHz band.
Figure 5-11 Dual Band Selection
5.4Wireless 2.4GHz
Figure 5-12 Wireless menu
There are six submenus under the Wireless menu, shown in Figure 5-12: Wireless Settings, WPS, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and you will be able to configure the corresponding functions.
5.4.1Wireless Settings
Choose menu “Advanced→Wireless 2.4GHz→Wireless Settings”, you can configure the basic settings for the wireless network of 2.4GHz on this page.
- 36 -
