Archer C8 AC1750 Wireless Dual Band Gigabit Router
Allow Guests To Access My Local Network - If this checkbox is selected, anyone who connects to the guest network has access to your local network, not just Internet access.
Enable Guest Network Bandwidth Control - If this checkbox is selected, the Guest Network Bandwidth Control rules will take effect.
1)Egress Bandwidth For Guest Network - Specify the upload speed through the WAN port for Guest Network.
2)Ingress Bandwidth For Guest Network - Specify the download speed through the WAN port for Guest Network.
Wireless 2.4GHz
Enable Guest Network (2.4G) - Select this checkbox to enable 2.4GHz guest network.
Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your Guest Network.
Guest Number - Limit the number of the guest.
Wireless Security - You can configure the security of Guest Network here.
Access Time - During this time the wireless stations could access the AP.
Wireless 5GHz
Enable Guest Network (5G) - Select this checkbox to enable 5GHz guest network.
Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your Guest Network.
Guest Number - Limit the number of the guest.
Wireless Security - You can configure the security of Guest Network here.
Access Time - During this time the wireless stations could accessing the AP.
Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth Control on the page “Bandwidth
5.7DHCP
Figure 5-39 The DHCP menu
- 60 -
