TP-Link manual Archer C8 AC1750 Wireless Dual Band Gigabit Router, Method Two

Archer C8 AC1750 Wireless Dual Band Gigabit Router

Target - In this filed, select a target from the drop-down list for the rule.

Schedule - In this field, select a schedule from the drop-down list for the rule.

Status - In this field, there are two options, Enabled or Disabled. Select Enabled so that the rule will take effect. Select Disabled so that the rule won't take effect.

5.Click Finish to complete adding a new rule.

Method Two:

1.Click the Add New… button and the next screen will pop up as shown in Figure 5-70.

2.Give a name (e.g. Rule_1) for the rule in the Rule Name field.

3.Select a host from the Host drop-down list or choose “Click Here To Add New Host List”.

4.Select a target from the Target drop-sown list or choose “Click Here To Add New Target List”.

5.Select a schedule from the Schedule drop-down list or choose “Click Here To Add New Schedule”.

6.In the Status field, select Enabled or Disabled to enable or disable your entry.

7.Click the Save button.

Figure 5-70 Add Internet Access Control Entry

For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the LAN to access the Internet, you should follow the settings below:

1.Click the menu Access Control on the left. Select Enable Internet Access Control and choose "Allow the packets specified by any enabled access control policy to pass through the router".

2.Click Setup Wizard button.

3.Add a new host with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA, and click Next.

- 86 -