TP-Link TL-SL3452 system-time dst predefined

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
99
backup-ntp-server —— The IP address for the Secondary NTP Server.
fetching-rate —— Specify the rate fetching time from NTP server.
Command Mode
Global Configuration Mode
Example
Configure the system time mode as NTP, the time zone is UTC-12:00, the
primary NTP server is 133.100.9.2 and the secondary NTP server is
139.78.100.163, the fetching-rate is 11 hours:
TL-SL3428(config)#system-time ntp UTC-12:00 133.100.9.2 139.79.100.163
11
system-time dst predefined
Description
The system-time dst predefined command is used to select a predefined DST
configuration and the configuration can be recycled.
Syntax
system-time dst predefined [ USA | Australia | European | New-Zealand ]
Parameter
USA | Australia | European | New-Zealand —— Predefined DST mode, with
four options: USA, Australia, European and New-Zealand. By default, the
setting is “European”.
The DST time periods which the four predefined DST mode represents are
displayed as follow:
USA: Second Sunday in March, 02:00 ~ First Sunday in November, 02:00.
Australia: First Sunday in October, 02:00 ~ First Sunday in April, 03:00.
European: Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00.
New Zealand: Last Sunday in September, 02:00 ~ First Sunday in April, 03:00.
Command Mode
Global Configuration Mode
Example
Configure the DST period of the switch as European:
TL-SL3428(config)#system-time dst predefined European