TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
100
system-time dst date Description
The system-time dst date command is used to specify the DST configuration
in Date mode. This configuration is recurring in use. By default, the current year
is used as the starting time. DST time periods should be within 12 months over
one/two year.
Syntax
system-time dst date {smonth} {sday} {stime} {emonth} {eday} {etime} [offset]
Parameter
smonth —— Month to start, with the options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Aug, Sep, Oct, Nov, Dec
sday
——
Day to start, ranging from 1 to 31. Please mind that the number of
days depends on the month.
stime —— Time to start, in the format of hh:mm.
emonth —— Month to end, with the options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Aug, Sep, Oct, Nov, Dec
eday —— Day to end, ranging from 1 to 31. Please mind that the number of
days depends on the month.
etime —— Time to end, in the format of hh:mm.
offset —— Specify the time adding in minutes when Daylight Saving Time
comes. The value ranges from 1 to 1440 and the default value is 60 minutes. It
is optional.
Command Mode
Global Configuration Mode
Example
Configure the DST start time as 00:00 am on April 1st, the end time as 00:00 am
on October 1st and the offset as 30 minutes:
TL-SL3428(config)#system-time dst date Apr 1 00:00 Oct 1 00:00 30
system-time dst recurring Description
The system-time dst recurring command is used to specify the DST