TP-Link TL-SL3452 show cluster ntdp , show cluster

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
219
show cluster ntdp
Description
The show cluster ntdp command is used to display NTDP configuration
information.
Syntax
show cluster ntdp [ interface [fastEthernet port | gigabitEthernet port ] |
device-list ]
Parameter
port —— The Fast/Gigabit Ethernet port number. By default, the configuration
of all Fast / Gigabit Ethernet ports is displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global information of NTDP:
TL-SL3428#show cluster ntdp
Display the NTDP configuration of all Ethernet ports:
TL-SL3428#show cluster ntdp interface
Display the device table of NTDP:
TL-SL3428#show cluster ntdp device-list
show cluster
Description
When the current switch is Commander Switch, the show cluster command is
used to display the global configuration of Cluster.
Syntax
show cluster
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of Cluster:
TL-SL3428#show cluster