Manuals / Brands / Computer Equipment / Network Router / TP-Link / Computer Equipment / Network Router

TP-Link TL-SL3452 ip arp inspection(interface) , ip arp inspection limit-rate

1 232

Download 232 pages, 1.1 Mb

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide

61

Command Mode

Interface Configuration Mode (interface fastEthernet / interface range

fastEthernet / interface gigabitEthernet / interface range gigabitEhternet)

Example

Configure the Fast Ethernet ports 2-5 as the Trusted Port:

TL-SL3428(config)#interface range fastEthernet 1/0/2-5

TL-SL3428(config-if-range)#ip arp inspection trust

ip arp inspection(interface)

Description

The ip arp inspection command is used to enable the ARP Defend function. To

disable the ARP detection function, please use no ip arp inspection command.

ARP Attack flood produces lots of ARP Packets, which will occupy the

bandwidth and slow the network speed extremely. With the ARP Defend

enabled, the switch can terminate receiving the ARP packets for 300 seconds

when the transmission speed of the legal ARP packet on the port exceeds the

defined value so as to avoid ARP Attack flood.

Syntax

ip arp inspection

no ip arp inspection

Command Mode

Interface Configuration Mode (interface fastEthernet / interface range

fastEthernet / interface gigabitEthernet / interface range gigabitEhternet)

Example

Enable the arp defend function for the Fast Ethernet ports 2-6:

TL-SL3428(config)#interface range fastEthernet 1/0/2-6

TL-SL3428(config-if-range)#ip arp inspection

ip arp inspection limit-rate

Description

The ip arp inspection limit-rate command is used to configure the ARP speed

Contents

Main COPYRIGHT & TRADEMARKS CONTENTS Chapter 3 IEEE 802.1Q VLAN Commands ........................................................ 17 Chapter 4 Protocol-based VLAN Commands................................................... 24 Chapter 7 Etherchannel Commands................................................................. 37 Chapter 8 User Manage Commands.................................................................. 42 Chapter 9 Binding Table Commands.................................................................50 Chapter 10 ARP Inspection Commands.............................................................. 60 Page Chapter 16 MAC Address Commands................................................................. 90 Chapter 17 System Configuration Commands................................................... 97 Chapter 18 Ethernet Configuration Commands................................................114 Chapter 22 Loopback Detection Commands.....................................................139 Page Page Page Preface Overview of this Guide Page Page Chapter 1 Using the CLI 1.1 Accessing the CLI 1.1.1 Logon by a console port Page 1.1.2 Logon by Telnet Page Page Page TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide 1.2 CLI Command Modes 1.3 Security Levels 1.4 Conventions 1.4.1 Format Conventions 1.4.2 Special Characters 1.4.3 Parameter Format Page Chapter 2 User Interface enable enable password disable configure exit end Chapter 3 IEEE 802.1Q VLAN Commands vlan interface vlan name switchport mode switchport access vlan switchport trunk allowed vlan switchport general allowed vlan switchport pvid show vlan summary show vlan brief show vlan Chapter 4 Protocol-based VLAN Commands protocol-vlan template protocol-vlan vlan protocol-vlan show protocol-vlan template show protocol-vlan vlan show protocol-vlan interface Chapter 5 Voice VLAN Commands voice vlan voice vlan aging time voice vlan mac-address switchport voice vlan mode show voice vlan show voice vlan oui show voice vlan switchport Page Chapter 6 GVRP Commands gvrp (global) gvrp (interface) gvrp registration gvrp timer Page show gvrp global show gvrp interface Chapter 7 Etherchannel Commands channel-group port-channel load-balance lacp system-priority lacp port-priority show etherchannel show etherchannel load-balance show lacp show lacp sys-id Chapter 8 User Manage Commands user name user access-control ip-based user access-control mac-based user access-control port-based user max-number user idle-timeout line password login login local show user account-list show user configuration Chapter 9 Binding Table Commands ip source binding ip dhcp snooping ip dhcp snooping global ip dhcp snooping information option ip dhcp snooping information strategy ip dhcp snooping information remote-id ip dhcp snooping information circuit-id ip dhcp snooping trust ip dhcp snooping mac-verify ip dhcp snooping limit rate ip dhcp snooping decline show ip source binding show ip dhcp snooping show ip dhcp snooping information show ip dhcp snooping interface Chapter 10 ARP Inspection Commands ip arp inspection(global) ip arp inspection trust ip arp inspection(interface) ip arp inspection limit-rate ip arp inspection recover show ip arp inspection show ip arp inspection interface show ip arp inspection statistics clear ip arp inspection statistics Chapter 11 DoS Defend Command ip dos-prevent ip dos-prevent type show ip dos-prevent Chapter 12 IEEE 802.1X Commands dot1x system-auth-control dot1x auth-method dot1x guest-vlan(global) dot1x quiet-period dot1x timeout dot1x max-reauth-req dot1x dot1x guest-vlan(interface) dot1x port-control dot1x port-method radius radius server-account show dot1x global show dot1x interface show radius accounting show radius authentication Chapter 13 System Log Commands logging buffer logging file flash clear logging logging host index show logging local-config show logging loghost show logging buffer show logging flash Page Chapter 14 SSH Commands ip ssh server ip ssh version ip ssh timeout ip ssh max-client ip ssh download show ip ssh Page Chapter 15 SSL Commands ip http secure-server ip http secure-server download certificate ip http secure-server download key show ip http secure-server Chapter 16 MAC Address Commands mac address-table static mac address-table aging-time mac address-table filtering mac address-table max-mac-count show mac address-table address show mac address-table aging-time show mac address-table max-mac-count interface show mac address-table interface show mac address-table mac-num show mac address-table mac show mac address-table vlan Chapter 17 System Configuration Commands system-time manual system-time ntp Page system-time dst predefined system-time dst date system-time dst recurring hostname location contact-info ip management-vlan ip address ip address-alloc dhcp ip address-alloc bootp reset reboot copy running-config startup-config copy startup-config tftp copy tftp startup-config firmware upgrade ping tracert loopback interface show system-time show system-time dst show system-time ntp show system-info show running-config show cable-diagnostics interface Page Chapter 18 Ethernet Configuration Commands interface fastEthernet interface range fastEthernet interface gigabitEthernet interface range gigabitEthernet description shutdown flow-control media-type duplex speed storm-control broadcast storm-control multicast storm-control unicast storm-control rate bandwidth clear counters show interface status show interface counters show interface description show interface flowcontrol show interface configuration show storm-control show bandwidth Chapter 19 QoS Commands qos qos cos qos dscp qos queue cos-map qos queue dscp-map Syntax Parameter Command Mode qos queue mode Description show qos interface show qos cos-map show qos dscp-map show qos queue mode show qos status Chapter 20 Port Mirror Commands monitor session destination interface monitor session source interface Description Syntax Parameter Command Mode show monitor session Chapter 21 Port isolation Commands port isolation show port isolation Chapter 22 Loopback Detection Commands loopback-detection(global) loopback-detection interval loopback-detection recovery-time loopback-detection(interface) loopback-detection config loopback-detection recover show loopback-detection global show loopback-detection interface Page Chapter 23 ACL Commands time-range absolute periodic holiday holiday(global) access-list create mac access-list access-list standard access-list extended Page rule access-list policy name access-list policy action redirect interface s-condition s-mirror access-list bind(interface) access-list bind(vlan) show time-range show holiday show access-list show access-list policy show access-list bind Page Chapter 24 MSTP Commands spanning-tree(global) spanning-tree(interface) spanning-tree common-config spanning-tree mode spanning-tree mst configuration instance name revision spanning-tree mst instance spanning-tree mst spanning-tree priority spanning-tree tc-defend spanning-tree timer spanning-tree hold-count spanning-tree max-hops spanning-tree bpdufilter spanning-tree bpduguard spanning-tree guard loop spanning-tree guard root Page spanning-tree guard tc spanning-tree mcheck show spanning-tree active show spanning-tree bridge show spanning-tree interface show spanning-tree interface-security show spanning-tree mst Chapter 25 IGMP Commands ip igmp snooping(global) ip igmp snooping(interface) ip igmp snooping immediate-leave ip igmp snooping drop-unknown ip igmp snooping vlan-config ip igmp snooping multi-vlan-config ip igmp snooping filter add-id ip igmp snooping filter(global) ip igmp snooping filter(interface) ip igmp snooping filter maxgroup ip igmp snooping filter mode show ip igmp snooping show ip igmp snooping interface show ip igmp snooping vlan show ip igmp snooping multi-vlan show ip igmp snooping groups show ip igmp snooping filter Chapter 26 SNMP Commands snmp-server snmp-server view snmp-server group snmp-server user Page snmp-server community snmp-server host Page snmp-server engineID snmp-server traps snmp snmp-server traps link-status snmp-server traps snmp-server traps mac snmp-server traps vlan rmon history rmon event rmon alarm Page show snmp-server show snmp-server view show snmp-server group show snmp-server user show snmp-server community show snmp-server host show snmp-server engineID show rmon history show rmon event show rmon alarm Chapter 27 LLDP Commands lldp lldp hold-multiplier lldp timer lldp receive lldp transmit lldp snmp-trap lldp tlv-select show lldp show lldp interface show lldp local-information interface show lldp neighbor-information interface show lldp traffic interface Page Chapter 28 Cluster Commands cluster ndp cluster ntdp cluster explore cluster cluster candidate cluster individual show cluster ndp show cluster neighbour show cluster ntdp show cluster show cluster manage role