TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
7
Now, you can logon by Telnet in login local mode.
1. Make sure the switch and the PC are in the same LAN. Click Start → Run to open the Run
window and type cmd in the prompt Run window as Figure 1-7 and click OK.
Figure 1-7 Run Window
2. Open Telnet, then type telnet 192.168.0.1 in the command prompt shown as Figure 1-8, and
press the Enter button.
Figure 1-8 Connecting to the Switch
3. Type the default user name and password admin/admin, then press the Enter button so as
to enter User EXEC Mode.
Figure 1-9 Enter into the User EXEC Mode
Now you can manage your switch with CLI commands through Telnet connection.