TP-Link TL-SL3452 storm-control multicast , storm-control unicast

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
120
storm-control broadcast
no storm-control broadcast
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable the broadcast control function for Fast Ethernet port 5:
TL-SL3428(config)#interface fastEthernet 1/0/5
TL-SL3428(config-if)#storm-control broadcast
storm-control multicast
Description
The storm-control multicast command is used to enable the multicast control
function. To disable the multicast control function, please use no storm-control
multicast command. Multicast control function allows the switch to filter
multicast in the network. If the transmission rate of the multicast packets
exceeds the set bandwidth in the storm-contorl rate, the packets will be
automatically discarded to avoid network broadcast storm.
Syntax
storm-control multicast
no storm-control multicast
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable the multicast control function for Fast Ethernet port 5:
TL-SL3428(config)#interface fastEthernet 1/0/5
TL-SL3428(config-if)#storm-control multicast
storm-control unicast
Description
The storm-control unicast command is used to enbale the unicast control
function. To disable the unicast control function, please use no storm-control