TP-Link TL-SL3452 show lldp

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
210
outgoing LLDPDU. To exclude TLVs, please use no lldp tlv-select command.
By default, All TLVs are included in outgoing LLDPDU.
Syntax
lldp tlv-select [port-description | system-capability | system-description |
system-name | management-address | port-vlan | protocol-vlan | vlan-name |
link-aggregation | mac-phy-cfg | max-frame-size | power | all]
no lldp tlv-select [port-description | system-capability | system-description |
system-name | management-address | port-vlan | protocol-vlan | vlan-name |
link-aggregation | mac-phy-cfg | max-frame-size | power | all]
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Exclude “management-address” and “port-vlan-id” TLVs in LLDPDU outgoing
from Fast Ethernet port 1:
TL-SL3428(config)# interface fastEthernet 1/0/1
TL-SL3428(config-if)# no lldp tlv-select management-address port-vlan
show lldp
Description
The show lldp command is used to display the global configuration of LLDP.
Syntax
show lldp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of LLDP:
TL-SL3428#show lldp