TP-Link TL-SL3452 show system-info , show running-config , show cable-diagnostics interface

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
112
show system-info
Description
The show system-info command is used to display system description, system
name, device location, system contact, hardware version, firmware version,
system time, run time and so on.
Syntax
show system-info
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system information:
TL-SL3428#show system-info
show running-config
Description
The show running-config command is used to display the current operating
configuration of the system or of a specified port.
Syntax
show running-config [ interface { fastEthernet port | gigabitEthernet port } ]
Parameter
port —— The Fast/Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system current operating configuration:
TL-SL3428#show running-config
show cable-diagnostics interface
Description
The show cable-diagnostics interface command is used to display the cable
diagnostics of the connected Ethernet Port., which facilitates you to check the