TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
1
Preface
This Guide is intended for network administrator to provide referenced information about CLI
(Command Line Interface). The device mentioned in this Guide stands for TL-SL3428/TL-SL3452
JetStream L2 Managed Switch.
The two devices of TL-SL3428 and TL-SL3452 are sharing this User Guide. For simplicity, we will
take TL-SL3428 for example throughout the configuration chapters. TL-SL3428 and TL-SL3452
just differ in the number of LED indicators and ports and all figures in this guide are of TL-SL3428.

Overview of this Guide

Chapter 1: Using the CLI
Provide information about how to use the CLI, CLI Command Modes, Security Levels and some
Conventions.
Chapter 2: User Interface
Provide information about the commands used to switch between five CLI Command Modes.
Chapter 3: IEEE 802.1Q VLAN Commands
Provide information about the commands used for configuring IEEE 802.1Q VLAN.
Chapter 4: Protocol-based VLAN Commands
Provide information about the commands used for configuring Protocol-based VLAN.
Chapter 5: Voice VLAN Commands
Provide information about the commands used for configuring Voice VLAN.
Chapter 6: GVRP Commands
Provide information about the commands used for configuring GVRP (GARP VLAN registration
protocol).
Chapter 7: EtherChannel Commands
Provide information about the commands used for configuring LAG (Link Aggregation Group) and
LACP (Link Aggregation Control Protocol).
Chapter 8: User Manage Commands
Provide information about the commands used for user management.
Chapter 9: Binding Table Commands
Provide information about the commands used for binding the IP address, MAC address, VLAN
and the connected Port number of the Host together. Besides it also provide information about the
commands used for monitoring the process of the Host obtaining the IP address from DHCP