TP-Link TL-SL3452 switchport trunk allowed vlan , switchport general allowed vlan

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
20
Example
Configure Fast Ethernet port 3 whose link type is “access” to VLAN 2:
TL-SL3428(config)#interface fastEthernet 1/0/3
TL-SL3428(config-if)#switchport access vlan 2
switchport trunk allowed vlan
Description
The switchport trunk allowed vlan command is used to add the desired Trunk
port to IEEE 802.1Q VLAN, or to remove a port from the corresponding VLAN.
Syntax
switchport trunk allowed vlan vlan-list
no switchport trunk allowed vlan vlan-list
Parameter
vlan-list —— VLAN ID list, ranging from 2 to 4094, in the format of 2-3, 5. It is
multi-optional.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Configure Fast Ethernet port 2 whose link type is “trunk” to VLAN 2:
TL-SL3428(config)#interface fastEthernet 1/0/2
TL-SL3428(config-if)#switchport mode trunk
TL-SL3428(config-if)#switchport trunk allowed vlan 2
switchport general allowed vlan
Description
The switchport general allowed vlan command is used to add the desired
General port to IEEE 802.1Q VLAN, or to remove a port from the corresponding
VLAN.