TP-Link TL-WDR3500 manual Static Routing List, To add static routing entries

TL-WDR3500

N600 Wireless Dual Band Router

4.16.1 Static Routing List

Choose menu “Advanced Routing → Static Routing List”, and then you can configure the static route in the next screen (shown in Figure 4-96). A static route is a pre-determined path that network information must travel to reach a specific host or network.

Figure 4-96 Static Routing

To add static routing entries:

1.Click Add New… shown in Figure 4-96,you will see the following screen.

Figure 4-97 Add or Modify a Static Route Entry

2.Enter the following data:

Destination Network - The Destination Network is the address of the network or host that you want to assign to a static route.

Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion.

Default Gateway - This is the IP Address of the gateway device that allows for contact between the Router and the network or host.

3.Select Enabled or Disabled for this entry on the Status drop-down list.

4.Click the Save button to make the entry take effect.

Other configurations for the entries:

Click the Delete button to delete the entry.

- 96 -