TP-Link TL-WDR3500 manual To modify or delete an existing entry

TL-WDR3500N600 Wireless Dual Band Router

Figure 4-25 Add or Modify Wireless MAC Address Filtering entry

To add or modify a MAC Address Filtering entry, follow these instructions:

1.Enter the appropriate MAC Address into the Address is XX-XX-XX-XX-XX-XX (X is 00-0A-EB-B0-00-0B.

MAC Address field. The format of the MAC any hexadecimal digit). For example:

2.Give a simple description for the wireless station in the Description field. For example: Wireless station A.

3.Select Enabled or Disabled for this entry on the Status drop-down list.

4.Click the Save button to save this entry.

To modify or delete an existing entry:

1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.

2.Modify the information.

3.Click the Save button.

Click the Enable All button to make all entries enabled

Click the Disabled All button to make all entries disabled.

Click the Delete All button to delete all entries.

Click the Next button to go to the next page.

Click the Previous button to return to the previous page.

For example: If you desire that the wireless station A with MAC address 00-0A-EB-B0-00-0B and the wireless station B with MAC address 00-0A-EB-00-07-5F are able to access the Router, but all the other wireless stations cannot access the Router, you can configure the Wireless MAC Address Filtering list by following these steps:

1.Click the Enable button to enable this function.

2.Select the radio button “Allow the entries specified by any enabled entries in the list to access” for Filtering Rules.

- 41 -