TP-Link manual 4.4.2 LAN, MAC Clone, TL-WDR3500 N600 Wireless Dual Band Router,  Note

TL-WDR3500N600 Wireless Dual Band Router

Static IP - Connections which use static IP address assignment.

The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually.

4.4.2LAN

Choose menu “Network → LAN”, you can configure the IP parameters of the LAN on the screen as below.

Figure 4-10 LAN

MAC Address - The physical address of the Router, as seen from the LAN. The value can't be changed.

IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.168.0.1).

Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask.

Note:

1)If you change the IP Address of LAN, you must use the new IP Address to log in the Router.

2)If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time，while the Virtual Server and DMZ Host will not take effect until they are re-configured.

4.4.3MAC Clone

Choose menu “Network → MAC Clone”, you can configure the MAC address of the WAN on the screen below, Figure 4-11:

Figure 4-11 MAC Address Clone

- 30 -