TP-Link manual Wireless Advanced, TL-WDR3500 N600 Wireless Dual Band Router

TL-WDR3500N600 Wireless Dual Band Router

3.Delete all or disable all entries if there are any entries already.

4.Click the Add New... button.

1)Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.

2)Enter wireless station A/B in the Description field.

3)Select Enabled in the Status drop-down list.

4)Click the Save button.

5)Click the Back button.

The filtering rules that configured should be similar to the following list:

4.6.5Wireless Advanced

Choose menu “Wireless 2.4GHz → Wireless Advanced”, you can configure the advanced settings of your wireless network.

Figure 4-26 Wireless Advanced

Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended.

Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here. The beacons are the packets sent by the Router to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons. The default value is 100.

RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, the Router will send RTS frames to a

- 42 -