TP-Link TL-WDR3500 manual Encryption - You can select either Automatic, or TKIP or AES,  Note

TL-WDR3500N600 Wireless Dual Band Router

Disable Security - If you do not want to use wireless security, check this radio button. But it’s strongly recommended to choose one of the following modes to enable security.

WPA/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared passphrase. The Router is configured by this security type by default.

•Version - you can choose the version of the WPA-PSK security on the drop-down list. The default setting is Automatic, which can select WPA-PSK(Pre-shared key of WPA) or WPA2-PSK(Pre-shared key of WPA) automatically based on the wireless station's capability and request.

•Encryption - When WPA-PSKor WPA is set as the Authentication Type, you can select either Automatic, or TKIP or AES as Encryption.

Note:

If you check the WPA/WPA2-Personalradio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-21.

Figure 4-21 WPA/WPA2 – Personal

•PSK Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. The default password is the same with the default PIN code, which is labeled on the bottom of the Router or can be found in Figure 4-16.

•Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.

WPA/WPA2- Enterprise - It’s based on Radius Server.

•Version - you can choose the version of the WPA security on the drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request.

•Encryption - You can select either Automatic, or TKIP or AES.

Note:

If you check the WPA/WPA2-Enterpriseradio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-22.

- 38 -