general

Operation information

Points List - RTM Module

Binary inputs

•Emergency stop

•External auto/stop

•Unoccupied/occupied

•Dirty filter

•VAV changeover with hydronic heat

Binary outputs

•VAV box drive max (VAV units only)

•CV unoccupied mode indicator (CV units only)

•Alarm

•Fan run request

•Water pump request (water-cooled only)

Analog input

•Airside economizer damper minimum position

Analog output

• Outside air damper actuator

Heat Module:

• Analog output

Points List - GBAS Module

Binary inputs

• Demand limit contacts

Binary outputs

•Dirty filter relay

•Refrigeration fail relay

•Heat fail relay

•Supply fan fail relay

•Active diagnostics

Analog inputs

•Occupied zone cooling setpoint

•Occupied zone heating setpoint

•Unoccupied zone cooling setpoint

•Unoccupied zone heating setpoint or minimum outside air flow setpoint

•Supply air cooling setpoint

•Supply air heating setpoint

•Supply air static pressure setpoint

Points List - ECEM Module

Analog inputs

•Return air temperature

•Return air humidity

In addition, units with aVOM have:

Binary inputs

•VOM mode A, unit off

•VOM mode B, pressurize

•VOM mode C, exhaust

•VOM mode D, purge

•VOM mode E, purge w/duct pressure control

Binary outputs

• V.O. relay

Points List -TracerTMLCI-I Module

ConstantVolume (CV) Points

Binary inputs

•Airside economizer enable/disable

•Condensor type (air or water cooled)

•Condensor water flow status

•Emergency shutdown

•Local fan switch enable/disable

•Mechanical cooling lockout

•Mechanical heating lockout

•Mixed air temperature

•Occupancy

•Occupancy override

•Occupancy sensor

Binary outputs

•Airside economizer status

•Alarm status

•Compressor on/off status

•Condensor circuit information

•Condensor water pump status

•Waterside economizer status

Analog inputs

•Airside economizer dry bulb setpoint

•Airside economizer minimum setpoint

•Building static pressure input

•Maintenance required time

•Occupancy bypass time

•Outdoor air damper minimum position setpoint

•Outdoor air relative humidity

•Outdoor air temperature

•Unit start delay time setpoint

•Zone temperature

•Zone temperature setpoint

•Zone temperature setpoint (default)

•Zone temperature setpoint limits

•Zone temperature setpoint offsets

•Zone temperature setpoint shift

Analog outputs

•Alarm message

•Building static pressure status •Condensor saturated refrigerant temp

•Condensor water temperature

•Cooling output status

•Effective occupancy

•Exhaust fan status

•Heating output status

•Heating/cooling mode

•Morning warm up sensor temperature

•Outdoor air damper position

•Outdoor air enthalpy

•Outdoor air relative humidity

•Return air temperature

•Supply air temperature

•Supply fan status

•Unit status mode

•Zone CO2

•Zone relative humidity

Variable AirVolume (VAV) Points

Binary inputs

•Airside economizer enable/disable

•Condensor water flow input

•Emergency override

•Local fan switch enable/disable

•Mechanical cooling lockout

•Mechanical heating lockout

•Occupancy

Binary outputs

•Airside economizer status

•Alarm status

•Compressor on/off status

•Condensor circuit information

•Condensor type (water or air cooled)

•Condensor waterflow status

•Condensor water pump status

Analog inputs

•Airside economizer dry bulb setpoint

•Airside economizer minimum position

•Building static pressure input

•Building static pressure setpoint

•Daytime warm up setpoint

•Daytime warm up terminate setpoint

•Maintenance required time

•Occupancy bypass time

•Outdoor air damp min position setpoint

•Outdoor airflow minimum setpoint

•Outdoor air relative humidity

•Outdoor air temperature

•Supply air cooling setpoint

•Supply air cooling setpoint (default)

Analog outputs

•Building static pressure status

•Alarm message

•Condensor saturated refrigerant temp.

•Condensor water temperature

•Condensor water temp (local)

•Cooling output status

•Exhaust fan status

•Heating output status

•Heating/cooling mode

•Mixed air temperature

•Morning warm up sensor temperature

•Outdoor air damper position

•Outdoor air enthalpy

•Outdoor air flow

•Outdoor air relative humidity status

•Outdoor air temperature status

•Return air temperature

70

SCXG-SVX01B-EN

Page 69 Page 71
Page 70
Image 70
Trane SCXG-SVX01B-EN manual Points List RTM Module, Points List Gbas Module, Points List Ecem Module
Page 69 Page 71

SCXG-SVX01B-EN specifications

The Trane SCXG-SVX01B-EN is an advanced variable refrigerant flow (VRF) system designed to provide efficient and flexible heating and cooling solutions for commercial and residential applications. This system exemplifies Trane's commitment to innovation, energy efficiency, and ease of installation, making it a standout choice in the industry.

One of the main features of the SCXG-SVX01B-EN is its ability to deliver precise temperature control across multiple zones. The system utilizes a modular design that allows for the connection of multiple indoor units to a single outdoor unit, enabling simultaneous heating and cooling in different areas of a building. This zoned comfort not only enhances occupant satisfaction but also contributes to energy savings by allowing for targeted climate control where it is most needed.

Trane's VRF technology is complemented by its inverter-driven compressors, which adjust their speed according to the demand for heating or cooling. This means that the system operates more efficiently than traditional systems by consuming less energy during partial load conditions. The SCXG-SVX01B-EN also integrates advanced heat recovery capabilities, allowing it to transfer heat from one zone to another, further optimizing energy usage.

The unit's compact design simplifies installation, making it suitable for both retrofit projects and new constructions. The flexible piping layout supports various configurations, allowing easy adaptation to the building's architecture. The model also incorporates intelligent controls, offering a user-friendly interface that enhances operational flexibility and promotes energy management.

In addition to its performance features, the Trane SCXG-SVX01B-EN emphasizes sustainability. It uses advanced refrigerants with low global warming potential (GWP), aligning with environmental regulations and helping to minimize the system's ecological footprint. The durable construction of the system ensures longevity and reliability, reducing maintenance costs and enhancing overall operational efficiency.

Finally, Trane supports its products with comprehensive warranties and a network of service professionals, ensuring that customers have access to expert assistance throughout the life cycle of their system. The SCXG-SVX01B-EN represents a blend of technology, efficiency, and versatility, making it an ideal choice for those seeking an effective heating and cooling solution.
Top Page Image Contents